KPR S13/S14/S15 Steering Angle Knuckles
Product Description
Get that extreme steering angle you've been missing with KPR Steering Angle Knuckles. Achieve up to 58 degrees of steering angle on the leading wheel and 52 degrees on the trailing wheel with our version 2 knuckles! Comes powder coated in gold.
Nissan S14 or S15 hubs and ball joints must be used to run KPR Steering Angle Knuckles. For the best results use in conjunction with KPR outer tie rod ends, KPR 8mm steering rack spacers, aftermarket inner tie rods, modifications to the factory bump stops and a proper race alignment is NEEDED.
Depending on wheel size and offset and vehicle ride height wheel well clearance modifications and relocating the factory wiring harness from the factory position is highly recommended.
Nissan S14 or S15 hubs and ball joints must be used to run KPR Steering Angle Knuckles. For the best results use in conjunction with KPR outer tie rod ends, KPR 8mm steering rack spacers, aftermarket inner tie rods, modifications to the factory bump stops and a proper race alignment is NEEDED.
Depending on wheel size and offset and vehicle ride height wheel well clearance modifications and relocating the factory wiring harness from the factory position is highly recommended.
